Using VDSL Monitor.

NOTE. VDSL Monitor WILL NOT work with the last gateway firmware upgrede.
Please use our online tool as it has been upgaded to use the new firmaware.
All development and support has been discontinued as we are focusing our spare time on DOCSIS3.0 technologies.

Stay tuned for a complete DOCSIS 3.0 QAM Tool (D3QT) that will help troublesoot and monitor DOCSIS3.0 cable modems, STBs and cable devices.

After installation and configuration of VDSL Monitor you can now start using VDSLMonitor's cool features.

You can start gathering information in two ways.

1. In a static mode by clicking 'Actions / Test connection' menu option.

This method is mainly used to test connectivity but it can be used to gather static information from the gateway. After the 'Test connection' command finishes all the DMT and current VDSL statistics will be loaded into VDSL Monitor. This information is static and will not change until another 'Actions / Test connection' command is executed.

This method also creates a 'preview.txt' file in the default VDSL Monitor directory. The purpose of this file is to troubleshoot the gateway's firmware changes so new versions of the firmware can be includded in future versions of VDSL Monitor.

2. In a dynamic mode by clicking the 'Actions / Start acquisition' menu option.

By using this method VDSL Monitor will execute one acquisition run periodically and set by the acquisition interval. Information gathered in this mode will make all the charts and logs be updated accordingly. This is the main intended use for VDSL Monitor.

In this mode VDSL Monitor will create and append information to the following files (the format and number of files is subject to change in the future.)
2.a statistics.csv [VDSL line and change statistics file]
2.b event_log.txt [VDSL Monitor events log]
2.c *.png [Image files created by the automatic ftp upload process]
2.d *.html [HTML files created by VDSL Monitor 'save as' reports]

Errors and changes to the VDSL line and statistics will be graphed and logged to the appropiate sub systems. After a successful connection to the gateway the DMT graphs will be shown in the first tab. As you move the mouse over these charts the tone information window will change accordingly. The information displayed in the window is:

1. Current VDSL band.
2. Tone number selected.
3. Frequency range for the selected tone.
4. Bit load for the selected tone.
5. Bits in ADSL band
6. Bits in VDSL downstream band 1
7. Bits in VDSL upstream band 1
8. Bits in ADSL downstream band 2

Points 1 to 4 are self explanatory.
Point 5 is the total number of bits assigned to the segment used by ADSL's downstream (which is now part of VDSL downstream band 1).
Point 6 is the total number of bits assigned to VDSL's downstream band 1 excluding the ADSL segment in point 5.
Point 7. is the total number of bits assigned to VDSL's upstream band 1.
Point 8. is the total number of bits assigned to VDSL's downstream band 2.

At this point you can start an acquisition run and get some data. Some features like the error distribution chart require VDSL Monitor to be running for a few hours in able to see some results. So to start the acquisition process set the acquisition interval to the desired time interval and on the main window click on the main menu's 'Actions / Start acquisition'

One important thing to understand is that the CRC, FEC, SNR error graphs are based on the acquisition interval so if you set this interval too high these graphs will change based on that particular interval.

feedback Copyright © 2000-2018 by Dohrenburg Systems' Web Development Team.
Legal Stuff. Viewing of this website signifies your agreement.
Dohrenburg Systems Privacy Policy.
Please report any problems with this website to the Webmaster.
Last Update: October 8, 2014